Hoover Smartwash vs Bissell Proheat 2x

Today we’re going to compare the ease of use and effectiveness of two very popular deep carpet cleaners – Hoover Smartwash vs Bissell Proheat 2x.

Both of these carpet cleaners look pretty similar, having almost the same design and belonging to the same category of upright cleaners.

Besides the look, there are other features they have in common. Some of the most important are the same water capacity of 1 gallon and the same operating principle. Both carpet cleaners – Hoover Smartwash as well as Bissell Proheat 2X – are using two brush rolls mechanism.

Also, both these carpet cleaners instantly dry out your carpet, so you don’t need to wait for hours for your carpet to get dry. Without further ado, let’s take a deeper look into the features and functions these two carpet cleaners have to offer.

Hoover Smartwash vs Bissell Proheat 2x Revolution – Similarities and Differences

Both cleaners come with an easily attachable hose. Bissell comes with a feature called ‘Clean Shot’ which sprays the cleaning solution directly on the carpet, only by pushing the foot pedal.
On the other side, Hoover Smartwash has a ‘Dry Only’ button, so when you do the cleaning, you can push it down and try to soak up some more water.

Head on the Hoover’s hose is wider than the Bissell’s, and solution pours out much better. Hoover also comes with a head for deep cleaning and a rubber head that you can attach to clean not so harsh and deep stains.

Bissell’s head is significantly smaller ( you get more coverage with the Hoover ) but it comes with a separate attachment that is suitable for pet cleaning – which picks up any hair or any dirt related to your pet.

On the other side, Bissell comes with a longer cord – 10ft compared to slightly shorter Hoover’s cord of 8 ft.

When it comes to cleaning it’s very easy to clean them both. It’s very important to make sure to take out the brushes and rinse them well.

Also, when you detach the hose, make sure to clean the hole well to prevent clogging and possible further issues.

Both cleaners come with sample sizes of solutions, so we recommend you purchase some extra solution before you use your carpet cleaner.

Hoover Smartwash Carpet Cleaner

Hoover Smartwash Carpet Cleaner – Unboxing and Assembling

We’re sure you’ll know how to un-box the Hoover Smartwash Carpet Cleaner – the only thing you need to pay attention to is to save instructions for later use.

Also, assembling Hoover Smartwash is a fairly straightforward process.

It’s very easy to assemble – two water tanks are already assembled – dirty water tank, down there on the front of the carpet cleaner – which is very easy to remove using the handle on the top of it – and the soap solution tank on the back – you just pop it out and pop it back in.

A clean water tank comes separately but it’s also very easy to put it in place- just slide it in on the top above the dirty water tank.

There is a handle, too, which has a button. When you push the handle in the hole, the button is going to pop out in the place, so you don’t need to worry about your handle popping out.

Basically, by putting the handle in place you’ve successfully assembled your Hoover Smartwash Carpet Cleaner, there is only one thing left – the hose.

Hoover Smartwash Carpet Cleaner – Attachments

There is only one attachment – the hose. The hose is used for cleaning the carpet stairs, couches, or other furniture. It comes with a head that on the other side has two attachments – red rubber brush or white cleaning brushes. One end of the hose also has a button on it and the head snaps easily on it. To detach it, just push the snap button and pull the head off the hose.

Hoover Smartwash Carpet Cleaner – Troubleshooting

The main advice for keeping your Hoover Smartwash in good shape is to keep it clean. What does this mean? Well, from time to time, detach the parts of the carpet cleaner and clean them thoroughly using only warm water. Make sure no dirt or hair might cause the clogging of the main parts of the Hoover Smartwash. Especially pay attention to the holes and the valves.
Here are the two most often issues you can experience with Hoover Smartwash Carpet Cleaner.

Hoover Smartwash Carpet Cleaner Not Sucking up Water (Not Drying)

If you’re using it for a while for cleaning your carpet or a couch, and especially if you own a dog or cat, and your carpet cleaner suddenly stops sucking up water, you need to clean the filter placed on the backside of the dirty water tank. Take out the dirty water tank and wash it thoroughly. Also, make sure to clean the brush rolls mechanism, and you should be good to go.

Hoover Smartwash Carpet Cleaner Not Dispensing Water

Remove the clean water dispensing tank and check the valve on the bottom of the tank. Press up on the valve with your finger, to make sure it moves freely up and down. Dirt from previous cleaning sessions might clog the tube. Just fill the tank with the warm water, turn on the cleaner and wait until it starts dispensing the water.

Bissell Proheat 2x Revolution

Bissell Proheat 2x Revolution – Unboxing and Assembling

Like we said earlier, Bissell Proheat 2x Revolution comes with two water tanks – one for clean and the other for dirty water. Earlier, Bissell’s cleaners were using a bladder system, where clean and dirty water were in the same tank but separate.

The cleaner comes with the instruction manual and Quick Start Guide, which will pretty much do the job when it comes to assembling.

We’ll start by taking out the parts from the box, and the first is the handle. The handle is very light, although it’s made of metal and looks quite sturdy.

Next, you’ll see a carry handle, which you need to attach to the back of the cleaner – right below the handle.

Since the dirty water tank is already attached to the cleaner, take out the clear water tank. It has a water fill line, which actually presents the line between two working modes – express clean mode, which uses less water and solution, and deep cleaning mode. Down, on the right side of the body, you’ll find the button for switching between these two modes.

Now, that you’ve taken all the parts out of the box, assemble the handle sliding it into the top of the carpet cleaner. Simply, push it down, until it clicks.

Next, insert the carry handle on the back of the carpet cleaner, right below the place where you’ve placed the handle, and push it on the sides until it clicks.

Next, attach the screw which is taped to the handle, in the hole on the carry handle to secure it from moving.

Finally, put the clean water tank on the top of the cleaner – simply slide it in, and you’ve successfully assembled your Bissell Proheat 2x Revolution carpet cleaner.

Bissell Proheat 2x Revolution – Attachments

Bissell Proheat 2x Revolution comes with a hose, which is not attached to the cleaner, the hose has an attachment, too, it’s a spraying tool.

In addition, you get the measuring cup, top stain tool used for spot cleaning, furniture cleaning, generally speaking for general use; and nozzle clean out tool which is especially useful if you own pets.

Bissell Proheat 2x Revolution – Troubleshooting

Bissell Proheat 2x Revolution and the same goes for Hoover, doesn’t require any special care. It will be enough if you simply regularly clean it with warm water. That’s the way to prevent pet hair or any other kind of dirt to cause possible issues.

It’s really easy to detach all the main parts, clean them and bring them back into place.

Make sure, to take the nozzle off the part where the brushes are, and clean it thoroughly, along with brushes. Also, make sure to keep a clean debris filter located under the dirty water tank – that will surely prevent clogging.

There are no major differences between Hoover Smartwash Carpet Cleaner and Bissell Proheat 2X. Both of them do a great job. They are better, or more effective than the average vacuum cleaners. Also, both are easy to assemble and easy to use. Your choice depends only on your needs and personal preferences.

Anyway, if you want to save some money, you get a better buy with the Hoover Smartwash Carpet Cleaner. Besides the price, it’s more light when it comes to use – think of cleaning the carpet steps or some not so easy to reach places. Thus, our vote goes to Hoover Smartwash Carpet Cleaner.

The only consideration we have about it is the fact that it’s not so versatile when it comes to deep stains cleaning, but you surely already have your way to get rid of them. Anyway, deep stains are not something you have to deal with on an everyday basis. So, yes, Hoover Smartwash Carpet Cleaner is the winner of our today’s carpet cleaner’s duel.

Last update on 2024-04-24 / Affiliate links / Images from Amazon Product Advertising API